MACK Products              Model Marine
Accessories Pg. 2
Turned Aluminum Fittings
7115  Push/Pull Switches       by M.A.C.K. Simulated   push/pull   switches   machined   from   aluminum   bar   stock   and buffed    to    a    chrome-like    shine.        Perfect    for    any    dashboard    from runabouts   to   cruisers.      Comes   as   a   set   of   3.                        3/16"   diameter   x   1/4" high Price:  $7.50
7116  Steering Wheel Standoff     by M.A.C.K. This   Steering   Wheel   Standoff   is   machined   from   aluminum   bar   stock and   buffed   to   a   chrome-like   shine.      It   accepts   steering   wheel   shafts   up to   1/8"   dia.      Perfect   for   use   with   our   Spoked   Steering   Wheel   #   7128   to give that scale finished look to the steering station of your model. 3/8" dia. x 1/4" high         Has 1/8" dia. hole. Price:  $3.00
7122  Gas Tank Vent     by M.A.C.K. This   is   perfect   for   1/10   to   1/12   scale   models.      Cruisers   with   twin   tanks need   one   on   each   side   of   hull.      Machined   from   aluminum   bar   stock   and buffed to a chrome-like finish.  3/16" dia. x 3/16" high Price: $1.60
7123  Door Knob        by M.A.C.K. A   door   knob   to   give   the   finishing   touch   to   your   models   on   any   exposed doors.      Machined   from   aluminum   bar   stock   and   buffed   to   a   chrome-like shine. 5/16" dia. x 1/4" long Price:  $3.75
7412 Single Engine/Single Stick Morse Control This is an all metal piece and can be used in any 1/10 to 1/12 scale boat. Price: $12.00
7413 Single Engine Control with Separate Throttle and Gear Shifters. This is an all metal piece and can be used in any 1/10 to 1/12 scale boat. Price: $18.00
7414 Twin Engine Dual Stock Morse Controls This is an all metal piece and can be used in any 1/10 to 1/12 scale boat. Price: $18.00
7121  Exhaust Pipes                  Perfect   replacement   for   cast   exhaust   units   on   Dumas   kits.      For   use on   all   scale   size   Dumas   and   Midwest   boat   kits.      Machined   from aluminum   bar   stock   and   buffed   to   a   chrome-like   finish.     Two   pieces per set.   Each is 1/2" dia. x 5/32" high. Price:  $7.50 per set
7120  Hatch Skylight Grill            This   unique   scale   Hatch   Skylight   Grill   comes   with   "glass"   to   be   fit in   the   hatch   under   the   grill.      Can   be   used   on   any   1/10   or   1/12 scale   boat.      This   is   a   direct   replacement   for   the   Dumas   casting on   their   "Commander"   and   all   Sterling   models   stamped   grills.      A perfect    finishing    touch    to    your    scale    boat.        Machined    from aluminum    bar    stock,    assembled    and    buffed    to    a    chrome-like shine.   1.5" in dia. x 3/16" high Price:  $17.00
7124  Gauge Bezels             You   get   all   five   Gauge   Bezels   as   a   set.      Each   set   includes   one   1/2" dia.   bezel   for   the   tachometer   and   four   3/8"   dia.   bezels   for   water,   oil, amp., etc.  For use on 1/10th and 1/12th scale models.  Large bezel - 1/2" dia. x 1/4" high Small bezels -3/8" dia. x 1/4" high Price:   $11.25 per set     
 >>>  Comes with Gauge Faces and Plastic for Lenses  <<<
7117  Gas Cap          This   Gas   Cap   is   perfect   for   1/10   and   1/12   scale   models   that   have   exposed gas   tank   fills   on   deck.      Can   be   used   as   a   replacement   for   Dumas's   cast dock   fitting.      Machined   from   aluminum   bar   stock   and   buffed   to   a   chrome- like finish.      5/16" dia. x 1/4" high Price:  $4.00
7119  Spanner Wrench Deck Fill     Perfect for 1/10 and 1/12 scale models where water deck fills are located.  Machined from aluminum bar stock and buffed to a chrome- like shine.       5/16" dia. x 1/16" high Price:  $5.00
 7118  Flag Staff Base      by M.A.C.K. The Flag Staff Base accepts 1/8" diameter shaft and is machined to allow the flag staff to angle back at 10°.  Use with L-13 for lighted flag staff.  Machined from aluminum bar stock and buffed to a chrome-like shine. 3/8" dia. x 1/4" high with a 1/8" dia. hole. Price:  $3.50
7136  Throttle & 7137 Gear Shift Machined   from   bar   stock,   polished   to   a   mirror   finish,   and   comes completely   assembled.      Both   the   Throttle   and   Gear   Shift   have 3/32"   pins   for   mounting   to   the   surface.      This   type   of   lever   throttle and gear shift was used by a number of manufacturers. Throttle -  Length:  3/4"   Width:   5/16"    Height:  1/4" Gear Shift -  Length: 1-1/16"   Width:  5/16"  Height:  1/4" Price:  $7.50 each
Throttle
Gear Shift
7139 Key Switch Machined   from   bar   stock   and   polished   to   a   mirror   finish,   the   Key   Switch comes   with   a   3/32"   pin   for   easy   mounting   to   the   dashboard.      Used   in boats from 1/6th to 1/10th scale.  Size:  1/4" in diameter x 1/16" high. Price:  $3.50
7140  Push Button Switch Machined   from   bar   stock   and   polished   to   a   mirror   finish,   it   comes   with   a 3/32"   pin   for   easy   mounting   to   the   dashboard.      Used   in   boats   from   1/6th   to 1/10th   scale.     This   can   be   used   as   a   starter   button,   water   pump,   horn,   etc.            Size:  1/4" diameter x 1/8" high Price:  $3.00
704-3  Dodge Step Pads Chrome   plated   embossed   brass   step   pads   with   the   original   texture and   Dodge   logo.      Beautiful   finishing   touch   for   any   Dodge   model   boat.     Mount with glue or attachment tape.                                   Length:  1-1/4"    Width:      5/8"    Height:     1/16" Price:  $12.00 (pkg. of 2)
705-2   Large Exhaust Pipes Machined   from   bar   stock   and   polished   to   a   mirror   finish,   these   Large Exhaust Pipes can be mounted with glue or attachment tape. Size:  11/16" diameter x 3/16" high Price:  $7.50 (pkg. of 2)
Chrome Plated Castings
7141   Chocks Chrome   plated   castings   for   chocks.      The   castings   have   a   3/32" pin   for   easy   mounting.      Pin   can   be   filed   off   if   using   attachment tape on finished decks. Length: 3/8"  Width:  3/16"   Height:  3/16" Price:  $3.10 (pkg. of 2)
7142  Square Deck Bits Chrome   plated   castings   of   Perko   standard   square   bits.      Castings have   a   1/8"   diameter   pin   for   mounting,   which   can   be   filed   off   if using attachment tape on finished decks. Length:  3/8"     Width:   3/8"     Height:  7/16" Price:  $7.50 (pkg. of 2)
7143  Deck Vents Chrome   plated   casting   of   the   type   used   by   Lyman   Boats   and   other manufacturers   in   the   1950   -1960's.      Vents   can   be   mounted   by gluing, or by using attachment tape. Length:  5/8"     Width:   7/16"     Height:  1/4" Price:  $6.25 (pkg. of 2)
7144  Streamline Lifting Rings Chrome plated Streamline Lifting Rings of the type used by Chris Craft, Century, and other manufacturers from the 1940's and up.  Castings have a 1/8" pin for easy mounting, or pin can be filed off and attachment tape used to mount on finished decks. Length:  1/16"    Width:   1/4"     Height:  1/2" Price:  $3.75  (pkg. of 2)
7152  Small Streamline Deck Vents Chrome    plated    casting    of    the    small    Deck    Vents    used    on    the Century Thunderbolt.  Mount with glue or attachment tape. Length:  9/16"    Width:   7/16"    Height:  3/16" Price:  $5.00  (pkg. of 2)
7145  Streamline Deck Cleats Chrome plated casting of Streamline Deck Cleats (Perko type) used throughout the boating industry for fender tie-ups.  Castings have a 3/32" pin for easy mounting, or pin can be filed off and attachment tape used to mount on finished decks.       Length:  9/16"    Width:   3/16"     Height:  5/16" Price:  $4.75 (pkg. of 2)
Chrome plated casting of Square Step Pads used on all makes of boats.   Center of casting tread can be painted with flat white or black paint to simulate rubber grips on a step pad.  Mount with glue or attachment tape.
Length: 1/16”     Width:  9/16” Height”  ⅛”
7147  Square Step Pads
Price:  $5.00  Pkg. of 2
7153  Large Deck Vent Chrome    plated    casting    of    the    large    deck    vent    used    on    the Century Thunderbolt.  Mount with glue or attachment tape. Length: 1-1/16"    Width:  3/4"    Height:  /4" Price:  $4.40
7154  Tear Drop Bow Light Housing Chrome   plated   casting   of   a   Tear   Drop   Bow   Light   Housing   (Perko type)   used   by   many   manufacturers   of   boats.      The   housing   can   be used   with   static   combo   light   lens   #   7165,   or   with   MACK   Light   Lens   # L 30 for a working bow light. Length:  1-1/16"   Width:  5/8"   Height:  9/16" Price:  $3.75            Use  L 30 Light Lens  or  7165 Static Lens
7155  Round Lifting Ring Chrome plated casting of a Round Lifting Ring used by all the manufacturers of runabouts and speed boats.  Castings have a 1/8" pin for easy mounting or it can be filed off for mounting with attachment tape on finished decks. Length:  9/16"   Width:  1/4"   Height:  1/2" Price:  $3.75 (pkg. of 2)
7156  Streamline Deck Vents Chrome   plated   casting   of   the   Streamline   Deck   Vents   used   on   the Dodge   speed   boats   after   1930.      Mount   with   glue   or   attachment tape. Length: 1-1/8"   Width:     5/8"   Height:    5/16" Price:  $7.50 (pkg. of 2)
7157  Large Double Horn Deck Cleat Chrome    plated    casting    of    a    Large    Double    Horn    Deck    Cleat (Perko   type).      Mounting   is   made   easy   with   3/32"   pins   which   can be filed off for mounting with attachment tape. Length:  1"   Width:   1/4"   Height:  5/16" Price:  $6.00 (pkg. of 2)
7165  Static Combo Light Lens Static   combo   light   lens   chrome   plated   casting.      For   use   with   Bow Light Housing castings # 7154 and # 7158. Length: 5/8"    Width:  3/8"    Height: 1/4" Price:  $2.50
7149  Static Stern Light w/Mast Chrome   plated   stern   light   with   an   aluminum   mast.      Not   a   working light.      Used   for   display   only.      Use   with   M.A.C.K.'s   #   7118   Flag   Staff Base. Overall length - 3-1/4". Price:  $3.50
705-4  Engine Hatch Stays These   are   Brass   Engine   Hatch   Stays   with   mounting   hardware, and   are   used   for   holding   the   engine   hatch   in   open   position   on models,   just   like   on   the   real   boats.      Can   also   be   used   to   hold   open hinged deck hatches.   Each stay is 2-1/8" long. Price:  $7.00   (pkg. of 2)   
7158  Streamline Bow Light Housing Old    style    Streamline    Bow    Light    Housing    used    on    boats    of    the 1930's   and   40's.      Chrome   plated   casting   can   be   used   with   static combo   light   lens   #   7156,   or   with   MACK   Light   Lens   #   L   30   for working lights. Length:  1-1/16"   Width:   5/8"    Height:  9/16" Price:  $3.75         Use L30 Light Lens     or     7165 Static Lens                     
True Chrome Finish Trim w/Attachment Tape     7172-36 or 48 - 1/8" Width and 7174-36 or 48 - 1/4" Width At last a true scale chrome finish trim for that perfect finishing touch to your model.  The trim is 1/8" wide and comes with peel and stick  permanent attachment tape on the back.  This flexible trim can follow the curvature of boat hulls.  Available in three foot and four foot lengths.
Price:   7172-36    $5.75 each   Width:  1/8"      Height: 1/16"       Length:  36"             7172-48    $7.75 each   Width:  1/8"      Height: 1/16"       Length:  48"              7174-36    $10.25 each  Width:  1/4"      Height: 1/16"       Length:  36"                    7174-48    $13.75 each  Width:  1/4"      Height: 1/16"       Length:  48"
DST-1 and DST-3 Hardware Attachment Tapes This is a double sided tape for mounting deck hardware to finished decks.  NO MORE SMUDGES ! ! ! Once the part is positioned and taped down the glue is activated and the bond becomes permanent in 45 minutes. DST-1      1/4" x 5 yd roll         Price:   $3.50 per roll DST-3      3/4" x 3 yd roll         Price:   $8.00 per roll
Glues
7104  Zap CA Thin CA glue with no gap filling capability, but with a very fast cure rate.  Eliminates pinning or holding parts in place.  Great for gluing metal fittings on finished decks or cabins.  2 oz. bottle Note:  Will penetrate unfinished wood and stain it.  Use with care if you intend to keep a natural finish (unpainted). Price:  $12.00
7103   Zap-A-Gap Thick CA, with gap filling ability.  Great for when fits aren't quite perfect.  Slightly slower cure rate than ZapCA.   2 oz. bottle Price:  $12.00
7102  Z - Ends Additional ends for Zap-A-Gap glue, and a roll of micro- tubing for Zap CA glue.  Allows for one drop dispensing of glue. Price:  $3.75
7105 Zap Kicker Spray Allows instant cure of all CA glues.  Handy spray bottle directs the spray for sure cure.  Bottle can be refilled over & over.   2 oz. bottle Price:  $5.75
7101  Zip Kicker Refill Accelerator for super glues.  Forces immediate cure of glue.  Will not craze most plastics.    8 oz. bottle Price:  $11.00
7106  Formula 560 Canopy Glue The   perfect   glue   for   windows   and   windshields.   Goes   on   white   in   color,   but dries   crystal   clear.      Clean   up   mistakes   with   water   before   it   dries.      After   it dries, it's waterproof.     2 oz. bottle Price:  $3.50
7100  Z-Poxy Finishing Resin This   is   a   2-part,   odorless,   clear   epoxy   finishing   resin.      It's   perfect   for   laminating wood   and   foam,   as   well   as   applying   fiberglass   cloth.      Easy   sanding   for   perfect finishes.      Working   time   20   to   30   minutes;   cures   in   3   hours.      Non-brittle   formula.   Can be thinned for use as a penetrating epoxy with "xylene".  12 oz bottle Price:  $16.00
Accessories Pg. 1
TO
Now Comes as a Set of 5 Bezels - 1 Large & 4 Small