MACK Products
Model Marine
Speed Controls
7320 Dual Brushed/Air Cooled Electronic Speed Control
by M.A.C.K.
> 2-4 cell LI-PO / 6-12 cell NI-MH 30 amp cont.
> For 540 to 600 motors with no less than 27 turns
> Proportional Forward/Neutral/Reverse
> BEC: 5.6 volts, 2 amp
> Low Voltage Cutoff
> Overheat & Throttle Loss of Signal Protection
> 1.65" L x 1.26" W x 1.85" H 2.8 oz.
> Available in Tamiya or Deans battery connectors
7322 Single Brushed/Air Cooled Electronic
Speed Control
by M.A.C.K.
> 2-4 cell LI-PO / 6-12 cell NI-MH 45 amp cont.
> Single 540 to 920 Motors with no less than 12 turns
> Proportional Forward/Neutral/Reverse
> BEC: 5.6 volts, 2 amp
> Deans Power Input Connector
> Low Voltage Cutoff
> Overheat & Throttle Loss of Signal Protection
> 1.65" L x 1.26" W x 1.85" H 2.8 oz.
Price: $45.00
7322-T Tamiya connectors
7322-D Deans connectors
Price: $45.00
7320-T Tamiya connectors
7320-D Deans connectors
7321 Quickrun Brushed #860 Marine Electronic Speed Control
by M.A.C.K.
>2-4 cell LI-PO / 5-12 cell NI-MH 30 amp cont.
> For Twin 540 to 600 motors with no less than 15 turns
> Proportional Forward/Neutral/Reverse
> BEC: 5 volts, 2 amp
> Low Voltage Cutoff
> Overheat & Throttle Loss of Signal Protection
> Water & Dust Proof
> 1.83" L x 1.42" W x 1.43" H 2.5 oz.
Price:
$55.00
7328 Brushless/Sensorless Electronic Speed Control
by M.A.C.K
Preprogrammed by M.A.C.K. Products for plug & run operation.
> 120 Amp - Fully Proportional Forward and 40% Reverse throttle
> 2-4 cell LIPO/6-12 cell NI-MH batteries
> Low voltage cut-off protection for LI-PO batteries
> Signal loss protection/Overheat protection
> Water and Dust Proof
> Fan Cooled
> BEC 5.3 volts @ 5 amp w/switch
> 1-3/4” long x 1-1/4” wide x 1-5/16” high
Price: $60.00
7181 Turnigy Brushless Marine Electronic Speed Control
> 120 Amp - Proportional Forward and Reverse
> 3 Amp/6 volt B.E.C. with Deans Battery Plug
> 4 mm Motor Plugs
> Water Cooled
> Program Card Included
Price: $97.50
7182 Turnigy Brushless Marine Electronic Speed Control
> 180 Amp - Proportional Forward and Reverse
> 3 Amp/6 volt B.E.C. with Deans Battery Plug
> 2-6 cell LiPo/17 cell Ni-MH
> 4 mm Motor Plugs
> Water Cooled
> Program Card Included
Price:
$153.50
7183 Brushless/Sensorless Marine Electronic Speed Control
by M.A.C.K
> 70 Amp - Proportional One Way
> 2-6 cell LiPo/20 cell Ni-MH
> 5 Amp/5.5 volt B.E.C.
> Water Cooled
> Program from Radio
Price: $48.00
7185 Boat Brushless Electronic Speed Control
by M.A.C.K.
> Fully Proportional Forward & Reverse
> Water cooled
> Uses Deans Ultra Power Plug
> Uses 4 mm Motor Plugs
> 90 Amp Continuous Amperage, 120 Amp Peak
> Rated for 2-6 LiPo or 6-18 NI-MH
> Program card included
3-7/16" long x 1-1/2" wide x 7/8" high
Weight - 3.75 oz.
Price:
$85.00
7186 125 Amp One-Way Electronic Speed Control
by M.A.C.K.
> Water Cooled
> 125 Amp Continuous Amperage, 150 Amp Peak
> 5 Volt, 5 Amp BEC
> Uses Deans Ultra Power Plug
> Uses 4 mm Motor Plugs
> Programmed from Radio (instructions included)
Price:
$90.00
7187 Turnigy 200 Amp Sensorless Electronic Speed
Control
> Water Cooled & Water Proof
> Fully Proportional Forward & Reverse
> 200 Amp Continuous Amperage, 250 Amp Peak
> No BEC in unit
> Rated for 6-12 LiPo or 15-33 NI-MH
> Set up for 2 Pole Motors
> Uses Deans Ultra Power Plug
> Uses 4 mm Motor Plugs
> Fully Programmable with Program Card Included
Price: $187.00
7188 Turnigy 160 Amp Electronic Speed Control
> Water Cooled & Water Proof
> Fully Proportional Forward & Reverse
> 160 Amp Continuous Amperage, 200 Amp Peak
> Rated for 3-5 LiPo or 10-15 NI-MH
> 5 Volt, 3 Amp BEC
> Uses Deans Ultra Power Plug
> Uses 4 mm Motor Plugs
> Fully Programmable with Program Card Included
Price: $135.00
7189 Boat Brushless Electronic Speed Control
by M.A.C.K.
> Fully Proportional Forward & Reverse
> Water cooled
> Uses Deans Ultra Power Plug
> Uses 4 mm Motor Plugs
> 120 Amp Continuous Amperage, 150 Amp Peak
> Rated for 2-6 LiPo or 6-18 NI-MH
> Program card included
4-1/4" long x 1-3/4" wide x ⅞” high Weight - 5.75 oz.
Price: $105.00
7325 Electronic Speed Control by M.A.C.K.
for Brushed Motors
6 VOLTS to 11.1 VOLTS 60 AMP.
Programmable
Electronic
Speed
Control,
using
jumper
plugs
to
set
the
funtions
of
motor
direction,
(forward
&
reverse)
or
(forward
only),
as
well
as
type
of
battery
(up
to
9
cell
NI-MH
or
3
cell
LI-PO
batteries).
Unit
has
automatic
battery
discharge
safety
for
LI-PO
battery
cut
off.
Unit
has
a
build
in
B.E.C.
circuit
to
provide
5.6
volts
at 2 amps to the receiver.
Price:
$35.00
7326 Turnigy Marine 120 Amp E.S.C.
This
uses
2-6
cell
LIPO
or
6-18
cell
NIMH
batteries,
120
amp.
constant
/
720
amp
burst,
BEC
5.5
volts
at
5
amps,
and
is
a
water
cooled
unit.
It
is
equipped
with
Deans
power
plug
input
with
4
mm
motor
connectors and comes with an E.S.C. Program Card.
Price:
$110.00
7327 Turnigy Marine 150 Amp E.S.C.
This
uses
2-6
cell
LIPO
or
6-18
cell
NIMH
batteries,
150
amp.
constant
/
900
amp
burst,
BEC
5.5
volts
at
5
amps,
and
is
a
water
cooled
unit.
It
is
equipped
with
Deans
power
plug
input
with
4
mm
motor
connectors
and
comes
with
an
E.S.C.
Program Card.
Price:
$130.00
7329 M.A.C.K. Electronic Speed Control
> 80 Amp. Proportional forward & reverse.
> 4 mm motor plugs
> 5 amp - 5 Volt BEC
> Dean’s Power Plug
> Preprogrammed - Plug & Play
Price: $59.00
7330 On/Off Switch
For use with Electronic Speed Controls with no
on/off switch.
Price: $10.00
